Skip to main content


JXT Company

JXT Company
About Us
Shop Online
Products
Featured Products
Catalogs
Request Quote
Careers
Resource
Terms and Conditons
Links
Contact Us
Site Map
News Letters

JXTProduct highlight

To order, please call : 1-735-1978


EPR/PVC TYPE MV-105

TYPE MV-105 MEDIUM VOLTAGE POWER CABLE - up to 35kV, EPR Insulation, PVC Jacket, Shielded Single Conductor, 105°C Wet or Dry Locations

This Type MV-105 cable has a single conductor cable having stranded, bare copper conductors with Extruded Ethylene Propylene (EPR) insulation and polyvinyl chloride (PVC) jacket. Cables are rated up to 35kV for 105°C wet or dry locations.

  • For installation in free air, raceways and conduit
  • EPR insulation offers low dielectric loss and high dielectrical strength
  • PVC jacket provides mechanical protection of the shielding system during installation
  • Sunlight, chemical and moisture resistant insulation
  • Maximum continuous conductor temperature: 105°C DRY, 105°C WET
  • Request Quote: SALES@JXTCOMPANY.COM

    Application: Main feeder, distribution and branch circuits in industrial, commercial and electric utility installations

    EPR/Hypalon TYPE MV-90

    TYPE MV-90 POWER CABLE - 5000V, EPR Insulation, Hypalon Jacket, Single Conductor, 90°C Wet or Dry Locations

    EPR Hypalon cable is a single conductor EPR insulated, Hypalon jacketed nonshielded power cable for use in circuits not exceeding 5000 volts phase to phase at conductor temperatures of 90oC continuous normal operation. Cables are intended for use as Type MV-90 in applications meeting the requirements of Article 310.6 of the National Electrical Code. For other applications, they are intended for use as nonshielded power cables rated 5000 volts 100% insulation level and 133% insulation level.

  • For installation in aerial, conduit, open tray, and underground duct installations
  • Sizes 1/0 AWG and larger can be installed in cable trays
  • Moisture resistant insulation
  • Suitable for use in industrial and utility applications where ease of installation is a major concern.
  • For use in pulp and paper mills, petrochemical plants, other environmental protection systems, railroad facilities, and mining facilities
  • Maximum continuous conductor temperature: 90°C DRY, 90°C WET

    Request Quote: SALES@JXTCOMPANY.COM

  • Application: Circuits not exceeding 5000 volts in commercial, industrial and utility applications

    EPR/CPE TYPE MV-105

    TYPE MC-105 MEDIUM VOLTAGE POWER CABLE - 5000V, Shielded, EPR Insulation, CPE Jacket, Single Conductor, 105°C Wet or Dry Locations

    EPR power cable is a annealed bare copper single conductor cablle with Ethylene Propylene Rubber (EPR) insulation and flame-retardant Chlorinated Polyethylene (CPE) jacket. The cables may be used in wet or dry locations in circuits not exceeding 5000 volts 133% insulation level or 8000 volts 100% insulation level, at conductor temperatures not exceeding 105°C for normal, 140°C for emergency overload and 250°C for short-circuit conditions.

  • For installation in aerial, direct burial, conduit, open tray, and underground duct installations
  • Sizes 1/0 AWG and larger can be installed in cable trays
  • Sunlight and moisture resistant insulation
  • Maximum continuous conductor temperature: 105°C DRY, 105°C WET
  • Request Quote: SALES@JXTCOMPANY.COM


    Application: Main feeder, distribution and branch circuits in industrial, commercial and electric utility installations
    XLP/PVC TYPE MV-90

    TYPE MV-90 MEDIUM VOLTAGE POWER CABLE - up to 35kV, XLP Insulation, PVC Jacket, Shielded Single Conductor, 90°C Wet or Dry Locations

    Type MV-90 cable is a single conductor cable having stranded, bare copper conductors with cross-linked polyethylene (XLP) insulation and polyvinyl chloride (PVC) jacket. Cables are rated up to 35,000 volts, 90°C wet or dry locations.

  • For installation in conduit, duct or aerially when properly supported by a messenger
  • Sizes 1/0 AWG and larger can be installed in cable trays
  • Sunlight and moisture resistant insulation
  • Maximum continuous conductor temperature: 90°C DRY, 90°C WET

    Request Quote: SALES@JXTCOMPANY.COM

  • Application: Main feeder, distribution, and branch circuits in industrial, commercial, and electric utility installations

    URD TYPE MV-90

    URD-Primary Underground Distribution Cable - up to 35kV, XLP Insulation, EPR or PE Jacket, Single Conductor, 90°C Wet or Dry Locations

    The Primary Underground Distribution Cable is a single conductor, stranded or solid bare copper or aluminum with cross-linked polyethylene (XLP) insulation and ethylene-propylene rubber (EPR) or polyethylene (PE) jacket. Cable is listed as Type MV-90 for use in accordance with Article 328 of the NEC.

  • Direct burial or underground in duct.
  • XLP insulation offers low moisture absorption, good chemical resistance, low dielectric loss, and high dielectric strength; also offers tree-retardant characteristics
  • Maximum continuous conductor temperature: 90°C DRY, 90°C WET
  • Available with 100% or 133% Insulation level

  • Request Quote: SALES@JXTCOMPANY.COM

    Application: Underground residential and commerical distribution, as primary power cable in single-phase systems